Logistics Computer Backup-1

Article is the work of the logistics for my computer backup written. The article had been finished earlier. Not be revised. Inside some information may be different from your actual needs. According to your actual needs to do some modifications. And because of differences in computer hardware systems. So you should follow your actual situation to operate. Hereby description!

USB hard disk backup and recovery system can be used in all support USB hard disk to start the DELL machines, for computer systems a serious problem. If you use the system in the *. GHO file to restore, attention should be required to restore the backup file and restore the computer whether it is the same type of computer (ie, motherboards and other major chip models), and whether the system is restored by the demand systems (for example, can not be resumed in a number of client computer control of the computer program). And pay attention to the work of the backup hard disk anti-virus anti-virus.
The following are USB hard drive recovery operation: (on DELL GX520 computer as an example)
1, close the need to restore the computer, and insert the USB recovery system.
2, boot, when the DELL logo appears when the screen, press F12 key to enter the system boot sequence selection menu.
3, select the USB DEVICE to start the computer, this time using the USB recovery system in the active partition on the boot information to guide.
4, guide when completed, will start the system selection menu appears, pay attention: As the USB recovery system in the windows is not perfect, can not select windows boot menu. After waiting for three seconds into the USB dos automatic recovery system.
5, after the pop-up a key to enter the system recovery options, due to USB to restore the backup to restore the Department for stand-alone system, press C key to cancel.
6, choose 4. Ghost8.3 run Ghost8.3 version.
7, Ghost the system running. Look at the screen will appear:

This article uses the system for ghost 11, with Ghost8.3 have certain differences. But does not affect the use.
8, point OK, occurred about interface:
9, select the local (local)-partition (partition)-from Image (from file) to select the font after the white.

10, when you select from Image will be followed by pop-up select the file interface, as shown:

As the use of USB hard disk boot, the USB hard disk drive as the first sequence may be behind the figures in the letter reflected, for example, C: 1.1: [ghost system] NTFS drive is the drive letter on behalf of C, is the first hard drive first a partition, [] expressed by the partition of the volume, because the ghost system, Chinese display problems. Thus, the Chinese label will appear garbled. Is followed by the NTFS drive was referring to the partition as NTFS formatted drives. Thus we can see that the picture shows the first one the third hard drive partitions, the system volume for the Chinese, showing garbled. Format is NTFS.
11, select the first one the second hard disk partition (that is, the second USB hard drive partition, USB ghost backup system backup partition) shows should be X: 1.2 [bak] FAT drive. Figure shows:

Where X on behalf of letter, figure above as a non-USB boot drive (the system not from the USB in the boot) So bak second hard disk partition into the second zone, but recovery should be the first one the second hard disk partitions, please be careful not to chose the wrong partition.