Logistics Computer Backup-2

12, select bak partition gho files under the folder, in the gho folder may be a lot of system backup files, pay attention to select a system backup file.

ghost system icons and file selected state when the above diagram.

13, selected after the press OPEN button, there will be some information in the backup file, as shown:

1, in which there are two options, OK and Cancel, select OK that is the next step, select the Cancel will return when the Ghost had just finished loading the screen, if it recognized the need to restore the hard disk of the backup file is correct, select OK
14, select the OK option will pop-up hard drive interface, this interface is to select the partition where you need to restore the hard drive,

1, in which there are two options, OK and Cancel, select OK that is the next step, select the Cancel will return when the Ghost had just finished loading the screen, if it recognized the need to restore the hard disk of the backup file is correct, select OK.

15, this time using the USB lead, so the USB hard disk number is 1, the machine physical hard disk number is 2, select the No. 2 hard drive, and click OK, the next one interface appears:

1, the next one interface listed in the all the partitions on the hard disk, as well as detailed information on these locations, such as the partition number, partition type (primary partition, logical extended partition), ID number, format, label name, partition size, has been occupied by size. In general, only one directly back to the first partition can be, but some DELL machines installed due to a recovery, so the first partition may be used as a recovery partition to divide the program. Usually, such a partition does not exceed 100M, occupied by the following procedure is only 80M, this time will not be able to return to the first partition, if you encounter such a scene the way a computer, we recommend re-zoning, you can also directly back to the other should go to the partition ( is usually the second partition). (Where the same applies to a lot of dell brand machine or a hard disk with a restored machine. Please note. Recovery time must choose the correct partition!!!)

16, select the partition, it will be some tips, as shown:

Tip Are you sure you want to return to the partition, select yes.
17, if everything goes normal, then began to resume operation at this time interfaces are as follows:

This screen shows the restore operation will soon be some of the information: for example, the percentage of completion, speed (MB / min MB per minute) to complete the MB number, to be written in the number of MB has been used time and estimated time remaining and so on. There are copies of the following types (local, network, serial, etc.) and restore the partition type the address, the existing partition type, the current copies of documents.
18, is completed, will appear in this interface:

This interface has two options, Continue, and reset computer back to the original interface represent and re-start the computer, if you have already completed their work, which can restart the computer and unplug the USB backup system, from the local hard disk. If there are other work to do, we select Continue to continue the following steps.